机器参数

Vibrating Cleaner System 清废系统

The front end of the waste cleaner is equipped with a medium pressure fan, which can make the cardboard stick to the conveyor 

belt to run smoothly while cleaning the waste.

The main waste cleaning mechanism is composed of double vibrating waste cleaning mechanical structure, and cleaning structure 

is driven by an independent motor, which can achieve better waste cleaning effect through different degrees of shaking frequency.

The rear end is equipped with cylindrical fan and a brush to make it easier to clean the shaking scraps and achieve the best effect 

of waste cleaning.

Slop flat belt and waste guide plate are respectively equiped under both side of cleaning system and rear end of cleaning system, 

help eliminating waste paper, increase cleaning efficiency.

清废机前端配有中压风机，进行清废的同时，可使纸板能贴紧输送皮带平稳运行。

主要的清废机构由双震荡清废机械结构组成，每个震荡清废结构由独立电机传动，通过不同程度的抖动频率可实现更好的清废效果。

后端设有圆筒风机和毛刷设置，使抖动起来的纸板废屑更容易掉落，实现清废的最佳效果。

清废部下方两侧设有的斜坡式平面带和清废后端设有的废纸导输板，可以方便配合废纸输出皮带将废纸完全输出，减少废纸的清理工

作。

Front-end Paper Receiving Arm 前端接纸部位

Receiving part equipped with pressing bar, medium pressure fan to make paperborad enter main shaft of waste cleaning system 

smoothly.

Pneumatic control the rise and fall of receiving platform, which adapt to different die cutting height of different printing machine, easy 

for assembling and disassembling of template.

The operating side is equipped with a visual protective sliding door to prevent waste debris and ensure the safety of operators.

接纸部位配有压条和中压风机，从而使得纸板顺利而平整的进入清废主传动轴内。

接纸平台采用气动升降，可适应不同印刷机的模切高度，方便模板的拆装。

操作侧配手动推拉可视防护门，遮挡废屑，保证操作人员的人身安全。

Side wall 侧壁

The side wall is made of 26 PCs plate, with precise hole position and high strength of body structure, which can further enhance 

the stability of the machine when it is running at high speed, so as to increase the safety performance of the machine and make the 

appearance more beautiful.

侧壁采用 26 厘板材精密成型，孔位精准，机身结构强度高，进一步增强机器高速运转时的稳定性，使机器安全性能增加，外形更加

美观大气。

Bearing 轴

The main drive shaft is driven by an independent variable frequency motor. It consists of four full shafts with a concave wheel surface, divided into two upper and two lower, with a groove every 5cm on the wheel surface to make it easier to adjust belt according 

to board sizes, ensure special sharp carton passes and avoid damage to board.

The shaking shaft is drived by independent motor, which can be controlled independently. The speed adjustment is convenient to 

ensure the shaking travel.

The shaking shaft runs in two shaft way, with the front shaking shaft consisting of four shaking points and the rear consisting of 

three to increase the shaking frequency and improve the shaking effect

主传动轴采用独立变频电机传动，由四条带凹形轮面的整轴，分上下各两条，轮面每五公分一个槽，方便根据实际纸板尺寸随意调整

皮带，确保异形纸箱的顺利通过和避免对纸板产生损伤。

抖动轴传动由独立电机控制，可单独控制，速度调整方便，确保抖动行程。

抖动轴采用双轴运行，前抖动轴由四个抖动点，后抖动轴由三个抖动点组成，以加速抖动频率，提高抖动效果。

Operating control 操作控制

All motors of waste cleaner are controlled by independent buttons, which can be operated independently according to production 

requirements.

Emergency stop device is installed to ensure safety.

清废机所有电机都由独立按钮单独控制，可任意配合生产需求单独操作。

装有急停装置，以确保安全。