1, with 10, 20 or 30 oil change carton machinery worm gear reduction box lubricating oil.

2 all parts, repair, assembly, the whole machine to start the machine, observe whether the machine run normally. Appropriate heating roller, by adding a small amount of carton packaging machinery for oil, make its melting covering the surface of cylinder body, and then cut off all the power. If necessary, can be in machine external spraying paint, with plastic cover after drying, stored in a dry place.

3, if the chain is too loose, can be adjusted to remove sections. If have severely stretched, should be replaced. Use of carton machinery should be used according to certain principle and amount, and in a certain way for maintenance and maintenance, and solve the problem of different fault in time. Adjust and change the chain, in between links should be paid attention to clamp the direction should be consistent with the direction of chain operation, to avoid runtime impact collision, beating or even fall off.

4, remove and clean all rolling bearing, and add new grease, you can use the sodium calcium base grease.

5, remove all the dirt on the surface of the friction, especially clean chain and sprocket, rejoin the lubricating oil.

Carton packaging machinery maintenance and maintenance shall be conducted by a certain technical personnel, to ensure the quality and performance of carton machinery in use, play an important role in the production of the cartons and value.

6, check the stove smoke leakage. If it is found that smoke leakage, check the drum of cigarette smoke, the stove and the chimney. If you find damage, should timely repair and replacement. Electric heater model should check whether the electric heat pipe is damaged, if damaged, should be replaced. The development trend of corrugated carton equipment: improve the efficiency of production, mainly by improving the corrugated board production line or the operation of the corrugated cardboard printing width and speed, increase the operation amount per unit time, so as to improve the production efficiency of corrugated carton equipment. In recent years, with the domestic increasing demand for corrugated carton and the carton manufacturer's growing, mass production has become the development trend in the carton manufacturing industry in China.